Split Systems Air Conditioners installation starts with deciding the situation of the indoor and outdoor unit of air conditioning. After the case is confirmed, the installation of the indoor unit is started. A split system air conditioning may be an excellent option for keeping your home neat and cozy. This sort of A/C is ductless, and you need to install an indoor unit inside your rooms and the compressor and condenser unit outside, and then you need to connect these two units with cable.  Earlier, people used to install window air conditioners because there was no alternative available. But, now you can install split system air conditioners in your rooms to control your room temperature and you can save your power consumption bill by installing such air conditioners.

Each Split Systems Air Conditioner unit is exclusive to its manufacturer, but the overall installation process is the same.

Indoor unit

Outdoor unit also called external unit

Wall bracket (Optional)

Remote control

Connecting pipes

Screws

Screwdriver

Drilling machine

Copper pipes

Basic toolbox

1. Making holes as per wall bracket:

In the split AC box, there's an aluminum wall bracket with all the required holes and attachments. Set the indoor unit of split AC on this Elbow. To install indoor units of  Split Systems Air Conditioners, you need to install a few brackets on the wall.

2. Drilling holes within the wall:

After marking the holes on the wall, remove the wall bracket and drill holes within the wall with a drilling machine at the marks. After that, fix the bracket with the screws within the holes.

3. Passing necessary pipes and cables through a wall:

After fixing the bracket on the wall, drill a hole (of large diameter) across the wall to pass copper pipes called refrigerant tubing, drain hose, and then you can attach the indoor unit with the outdoor unit of split AC through these tubes.

4. Installing the indoor progression unit of split AC:

Now the Split Systems Air Conditioners indoor unit is very securely mounted on the wall bracket. Then pass the copper pipes (coupled to the indoor unit) through the opening drilled across the wall. Connect the drain pipe to at least one end of the indoor unit, pass it through an equivalent hole, and leave it free within the open space for water drainage.

5. Installing the entire process outdoor unit of split AC:

Bring the outdoor unit of split AC outside to the situation where the installation goes to require place. The outdoor unit also can be mounted on an external wall with the assistance of support. The wall on which you'll install the outdoor unit should be strong enough in touch with its weight and vibrations.

6. Installation of copper pipes and electrical connections:

The outdoor units of the split systems air conditioner are through with fitting, connect the 2 AC units with copper pipe. Finally, pass the electrical cable through the opening to attach the indoor unit of split AC to the outdoor unit of split AC.

After installing the indoor unit of the split AC, the outdoor unit of split AC, copper pipes, drain hose, and every one electrical connection of split AC, turn on the air conditioner to see if it works properly.

In a Split Systems Air Conditioners, Gas, a refrigerant, is fed into the compressor where it's pressurized. The restrained gas then goes through a succession of tubes that are meant to condense it into a liquid. It is suggested to hire skilled technicians to install such split system air conditioners because they can maintain all safety measurements during their installation process.